Here's the first pic of my new boat as delivered from the U.K. More pics to come soon.
Cant post pics apparently, so uploaded as pdf. for those who are interested.
Hi Guido, click on the gallery link. Then click on Marine/Boat related, scroll down to the bottom and click on add picture.
You can then add the picture and once it's approved and displayed you will see under rate the picture "Image linking codes" copy that code to the above post and your picture will be displayed.
There is a guide here:
http://maltafishingforum.com/talk/index.php?topic=1019.0
And here's how to link http://maltafishingforum.com/talk/index.php?topic=503.0
Thks for the tip Skip, done it but i got got a msg saying the pic was not approved, maybe because of the bare bottom ;D ?
Btw you can call me Mike.
there u go mike, hope we dont get sited since we posted a bare bottom boat OH WELL...............well done mate hope u enjoy it as much as possible
Some more pics in pdf attached.
Heres the Airmar M260 installation.
does it effect performance of the transducer when installed inside or there are different models?
There are different models i.e. transom mount, thru hull or in hull like mine, if the hull is composed of fiberglass only without any core material the in hull should work great provided you find the ideal location and the hull is free of air bubbles in the laminate.
i have a similar transducer emic. it penalizes a bit when doing very deep scans if installed in this manner. but they are not the same type, just similar and same brand. mine 200/50khz
according to a technichan the best is through hull with direct water contact but it requires professional installation, for sure.
as you know sometimes cannot install it out side the boat cos they will steel it or brake it. I need it for a max of 150mtr depth
a through hull is permanent emic. once installed, it is difficult to remove it
Granitu what model do you have ?
400c
Emic, at the depth range you want, a properly installed in hull should work fine even when you are cruising, but for best results you should match the fishfinders RMS output to the transducers rating. Hooking up a 500w fishfinder to a 1KW transducer will only give you half the the performance you could get out of the transducer. What fishfinder do you have ?
garmin 400c
Hi Guido
How are you doing. Congratulations on your new boat ;D It's lovely. ;D
Venere
You should post an updated photo of the warrior boat how it is right now in the sea.
Venere
@venere Thank you for your kind comments and welcome to the community, may i direct you to the appropriate section here you can introduce yourself.
http://maltafishingforum.com/talk/index.php?topic=903.0
Done that already. May I invite you to have a look at my introduction
Venere