Malta Fishing Forum

Marine => Engines/Drives and Electronics => Topic started by: camkev on June 14, 2009, 08:58:01 CET

Title: Please help!
Post by: camkev on June 14, 2009, 08:58:01 CET
Does anyone have some bullets or sliders male and female used for wiring?I need 10 of them.Cannot find any shops today and i need them a bit urgently cause my electr from the trottle to the engine has a loose connection.Tks Guys...by the way, i will pay you.
Title: Re: Please help!
Post by: benri on June 14, 2009, 09:24:19 CET
yes I have. Will send you a pm
Title: Re: Please help!
Post by: skip on June 14, 2009, 11:24:54 CET
Kev I have a pack of 10 blue bullets sitting here at Mosta, 10 Male, 10 Female, std type from Wurth.
Title: Re: Please help!
Post by: Destination Sea on June 14, 2009, 17:04:14 CET
yes i have xi haga jekk ma tindeqdix cempilli ha nibghatlek PM
Title: Re: Please help!
Post by: camkev on June 14, 2009, 17:27:10 CET
Tks Guys,i got some from skip....tks again for your prompt reply!!!
Title: Re: Please help!
Post by: Destination Sea on June 14, 2009, 17:28:46 CET
Good .Kollox sew issa?.. kelna naqra hassel Camkev.
Title: Re: Please help!
Post by: camkev on June 14, 2009, 17:31:00 CET
Not everything 100%,but working on it...there's nothing to do my frien...but better late and safe then sorry ;)
Title: Re: Please help!
Post by: Destination Sea on June 14, 2009, 18:28:20 CET
Nifmek 100%. suppost dil gimgha nirranga il mutur w nvara. ejja kuragg ha nistadu ;D ;D
Title: Re: Please help!
Post by: camkev on June 16, 2009, 21:35:00 CET
Just came back from the yard,after 2 days we still couldn't find the problem...No current to the engine...Last resort was that i had to remove all the harness and check the wires one by one..I was totally pissed but couldn't do anything else...but...at thre last minute we found an earth wire whic was loose and waaallllaaaaa the motor was ok.Hopefully will put the boat down on friday,do some checking and saturday out for alungi!!!!!
Title: Re: Please help!
Post by: Destination Sea on June 16, 2009, 22:24:30 CET
Thats good. Part has arrived on monday, going through a bit of a hassle to get them to replace. On thursday we shoud do it but i have to take the boat upto burmarrad from tarxien . They offered to take the boat and bring it back.i will go along. cannot understand why the mech cannot come over. I offered to pick him up and back again . a lot of less hassel to me. But i think its better this way i have no option because if not i end up lauching in year 3000. Thus  when ready i will launch bezz on thursday.Hope so because i have a feeling that there is something in the pipe line size 40inch.or maybe because everything went astray and had a lot of hussle to put things in order.
Title: Re: Please help!
Post by: The_Gaffer on June 17, 2009, 08:43:39 CET

Good luck to both of you. Alls well that ends well. Wee you out here there on Saturday
Title: Re: Please help!
Post by: Destination Sea on June 17, 2009, 19:19:08 CET
thanks gaffer much appreciated at this miserable time >:(
Title: Re: Please help!
Post by: Destination Sea on June 17, 2009, 21:45:54 CET
Good news. part replaced. hope to launch  soon ;D
Title: Re: Please help!
Post by: shanook on June 17, 2009, 21:52:47 CET
alungi look out herecomes destination ................hey hope by this week end shanook will be on the water.
Title: Re: Please help!
Post by: Destination Sea on June 17, 2009, 22:15:14 CET
thats good shanook. I hope that by this week i launch and test the boat.
Title: Re: Please help!
Post by: camkev on June 17, 2009, 22:30:51 CET
Hopefully will launch next friday,shanook you are still on land??Good luck destination sea ;)
Title: Re: Please help!
Post by: Destination Sea on June 17, 2009, 22:31:53 CET
same to you camkev. we deserve it after all :D