Malta Fishing Forum
International Game Fish Association
Latest Gallery Pictures

Luqa Station Malta North Virtual Buoy West Coast Dingli Cliffs Cirkewwa Mellieha
Pages: [1]
Author Topic: help in repaceing the impeller for my suzuki dt 55  (Read 3540 times)
0 Members and 1 Guest are viewing this topic.
Active User
Offline Offline

Posts: 240

« on: June 01, 2009, 17:00:44 CET »

hi to all,

does any one knows how the h.. the impeller for the above mentioned model is replaced.

my problem is i managed to separate the tail (lower part of te motor)which is  under the impeller plate  . the problem is i cant separate  the plate (in which the impeller turns on ) from the gearbox .

May be someone has a hint or a clue or anything .............



always want to fish.... why.... cos fun ux!!!
Destination Sea
VIP Member
Active User
Offline Offline

Posts: 411

« Reply #1 on: June 01, 2009, 19:41:30 CET »

cant help much , however heres a site with suzuki parts exploded view. check motor
specs and find relevant section. This might help you see what is required.

usually when removing the gear case the impellor is housed in a housing passing through the  shaft held in place with four bolts. removing these and lifting off the housing exposes the impellor.(usually held in place with a woodruff key or cam pin etc)note its location. The impellor is removed out of the shaft. If the gaskets are ok  just refit the impellor (noting direction of blades) smear there tips with grease so that when turning shaft to install housing they wont be damaged.when fitting gearbox to engine you will need to turn the shaft slighty to align splines.this you cant do by turning the prop. ensure that water tube engaes and that you wont bend the selector shaft(tal forward/reverse) and ensure all grommets are in place.

Marino Iside 500 - Etec 90
Buccaneer 130 - Mercury 20
Active User
Offline Offline

Posts: 240

« Reply #2 on: June 02, 2009, 05:32:48 CET »


always want to fish.... why.... cos fun ux!!!
Pages: [1]
Jump to:  

Recent Posts
[Today at 12:17:58]

[March 13, 2018, 10:44:07 CET]

[February 24, 2018, 17:12:19 CET]

by JBM
[February 20, 2018, 22:29:37 CET]

[February 20, 2018, 15:20:44 CET]

[February 12, 2018, 21:53:07 CET]

[January 30, 2018, 09:53:15 CET]

[January 02, 2018, 19:59:12 CET]

[December 24, 2017, 11:27:30 CET]

by skip
[December 09, 2017, 08:27:07 CET]

[November 27, 2017, 00:24:45 CET]

[October 16, 2017, 18:21:56 CET]

[September 06, 2017, 13:46:48 CET]

[August 28, 2017, 07:36:28 CET]

[August 09, 2017, 15:01:11 CET]
Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines | TinyPortal v0.9.8 © Bloc

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM