Malta Fishing Forum
International Game Fish Association
News:
 
*
Latest Gallery Pictures






WEATHER FORECASTS
Luqa Station Malta North Virtual Buoy West Coast Dingli Cliffs Cirkewwa Mellieha
Pages: [1] 2
  Print  
Author Topic: Buggiba Slipway  (Read 7032 times)
0 Members and 1 Guest are viewing this topic.
Spirit of Jason
VIP Member
Active User
*****
Offline Offline

Posts: 115



« on: November 16, 2009, 21:19:49 CET »

Hi Everyone

HELP
Got a small problem, on Wednesday my boat is coming out of the water and off to the boatyard, were she will be cleaned, spruced up and have the transducer fitted.
The only problem is, it is being trailord out at Buggiba slipway. I will be leaving from Ta'biex to head around to Buggiba, but I dont know were the slipway is coming in and approaching from the sea, if you know what I mean.
Can anyone give me co-ordinates of the slipway.
I appologise for any miss spelling of place names and the mis-use of nautical terms.

Regards

Russell
Logged
robby017
VIP Member
Active User
*****
Offline Offline

Posts: 2045



WWW
« Reply #1 on: November 16, 2009, 21:26:44 CET »

the slip way is on the left hand side on your way into st pauls's bay (circa 800m-1km in)........ on your way in there is a long jetty (200m+) the slipway is on the inner side of that jetty......
Logged

Scorpion 14.5 feet, Suzuki 60hp & Suzuki 6hp Aux.


Authorised & Licenced Fish Population Controller

Born to Fish, Forced to Work
robby017
VIP Member
Active User
*****
Offline Offline

Posts: 2045



WWW
« Reply #2 on: November 16, 2009, 21:27:07 CET »

will send a map with co ordinates shortly
Logged

Scorpion 14.5 feet, Suzuki 60hp & Suzuki 6hp Aux.


Authorised & Licenced Fish Population Controller

Born to Fish, Forced to Work
robby017
VIP Member
Active User
*****
Offline Offline

Posts: 2045



WWW
« Reply #3 on: November 16, 2009, 21:34:37 CET »

follow the red line....... u can't miss it

* slipway.doc (69 KB - downloaded 278 times.)
Logged

Scorpion 14.5 feet, Suzuki 60hp & Suzuki 6hp Aux.


Authorised & Licenced Fish Population Controller

Born to Fish, Forced to Work
caldaland
Premium Member
Active User
***
Offline Offline

Posts: 1576


« Reply #4 on: November 17, 2009, 00:03:45 CET »

it would be wonderful if everyone was as dedicated as robby in helping others! thanks!
Logged
Spirit of Jason
VIP Member
Active User
*****
Offline Offline

Posts: 115



« Reply #5 on: November 17, 2009, 06:36:34 CET »

Hi Caldaland
Yes I must agree with your comment, Robby went out of his way to make sure I knew how to get to the slipway at Buggiba.
Several of the forum members will probably be saying it is easy to find the slipway, which is probably true, when you know the area.
This will be the first time I will be using the slipway and thanks to Robby I am now confident, how to get there.
Thanks for your comment and a big thank you once again to Robby for all his help.

Russ
Logged
shanook
Senior Moderator Team
Active User
*****
Offline Offline

Posts: 2993



« Reply #6 on: November 17, 2009, 07:13:27 CET »

sorry didnt drop in much yesterday but if its any help the coordinates are
Edge of jetty                       35 57 104   14 24 417
and the slipway edge is         35 57 136   14 24 503

By the way rob how are u going to draw a red line in the sea.........the wonders of Rob.....:)PP
Logged
Spirit of Jason
VIP Member
Active User
*****
Offline Offline

Posts: 115



« Reply #7 on: November 17, 2009, 08:12:31 CET »

Thanks Shanook.
Appreciate your help.

Russ
Logged
caldaland
Premium Member
Active User
***
Offline Offline

Posts: 1576


« Reply #8 on: November 17, 2009, 10:20:58 CET »

youre welcome mate
Logged
robby017
VIP Member
Active User
*****
Offline Offline

Posts: 2045



WWW
« Reply #9 on: November 17, 2009, 11:44:25 CET »

Thanks guys, np.

@ shanook........ take a look at the map int... insomma, i'm sure you did :p
Logged

Scorpion 14.5 feet, Suzuki 60hp & Suzuki 6hp Aux.


Authorised & Licenced Fish Population Controller

Born to Fish, Forced to Work
shanook
Senior Moderator Team
Active User
*****
Offline Offline

Posts: 2993



« Reply #10 on: November 17, 2009, 14:52:12 CET »

yes rob but spirit of jason is not going to sail on ur map is he?!?!! he will be at sea and there aren't any red lines there, at least till last time i passed from there I didnt see any               :)PP
Logged
robby017
VIP Member
Active User
*****
Offline Offline

Posts: 2045



WWW
« Reply #11 on: November 17, 2009, 18:17:17 CET »

whatever you say tony  Tongue ara tahseb li ser immerik  Tongue
Logged

Scorpion 14.5 feet, Suzuki 60hp & Suzuki 6hp Aux.


Authorised & Licenced Fish Population Controller

Born to Fish, Forced to Work
baghira
VIP Member
Active User
*****
Offline Offline

Posts: 1811



« Reply #12 on: November 17, 2009, 20:29:08 CET »

You see guys, how much we struggle to help huh!!! Tongue
Logged

Ear Pain aaaaaahhhhhhhhhhhhhhhhh
robby017
VIP Member
Active User
*****
Offline Offline

Posts: 2045



WWW
« Reply #13 on: November 17, 2009, 20:43:31 CET »

........ and the funny thing....... it was addressed to Russell, yet, it was downloaded 40 times......... well, now i know 40 people know how to get to the slipway, following the 'IMAGINARY' red line...... (written in caps to aid the Older readers------ No Offence Tony Tongue )
Logged

Scorpion 14.5 feet, Suzuki 60hp & Suzuki 6hp Aux.


Authorised & Licenced Fish Population Controller

Born to Fish, Forced to Work
skip
Administrator
Active User
******
Offline Offline

Posts: 3940



WWW
« Reply #14 on: November 17, 2009, 20:45:35 CET »

Smiley
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Recent Posts
[November 06, 2019, 06:57:38 CET]

[November 01, 2019, 11:05:46 CET]

[October 23, 2019, 08:44:47 CET]

[August 05, 2019, 14:13:16 CET]

[July 19, 2019, 23:50:47 CET]

by skip
[July 18, 2019, 04:13:42 CET]

by skip
[July 18, 2019, 04:11:26 CET]

[July 10, 2019, 12:50:36 CET]

[June 27, 2019, 13:51:20 CET]

[June 16, 2019, 11:22:18 CET]

[May 14, 2019, 12:07:37 CET]

[May 09, 2019, 21:22:58 CET]

[April 01, 2019, 11:51:34 CET]

[March 26, 2019, 11:28:13 CET]

[March 24, 2019, 18:08:27 CET]
Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines | TinyPortal v0.9.8 © Bloc

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM